Product Characteristics：
• You can use a variety of live embolism easy to install the heat sink;
• by adjusting the temperature control valve using advanced thermal control system;
• live embolism and thermostatic valve heads are available;
• G1 / 2 "external thread and G3 / 4" external thread plugs to choose from;
• 6 mounting bracket (two kinds of the right connector, two kinds of the left joint, two kinds of the lower left or lower right side of the joint);
• Flexible installation of the "L" shaped mounting bracket (wall-mounted or floor-mounting alternatives);
• 50mm distance in the end portion connection point.
• Left or right connector available. No rear fins welded hooks (except models 10 and 11). Installation on the left or right side of the relatively flexible. Use "J" shaped mounting bracket mounted on the wall.

①100% of the test pressure 13bar

②Color RAL9010

③Maximum operating pressure -10bar

④Connector 4xDIN G1 / 2 "

⑤The maximum water temperature of 100 ℃

⑥A 675 models to choose from